PD&F SUPPORTS LOCAL STUDENTS AND MANUFACTURING SECTOR
This past Fall and Spring Primex Design & Fabrication was proud to partner with three students from the Ivy Tech Richmond Campus on industrial design projects. PD&F offered the students the opportunity to participate in real-world product design by creating new products using the unique Bubble-X extruded sheet material. Professor Patrick Piper supervised the students on behalf of Ivy Tech. Debbie Robinson and Shannon Davis coordinated the projects for Primex.
The objective of the partnership was to expose Ivy Tech students to the vast opportunities in the manufacturing sector by allowing them to design, create and plan the marketing of new products using the Bubble-X material.
Tyler Moore – graduating this Spring with an associate’s degree in Applied Science. Tyler has created an alternative solution to the typical application of plywood to windows as protection in hurricanes. The use of Bubble-X with a unique attachment system is a lighter weight and less expensive alternative to plywood. 9.5mm Bubble-X is less than 50 percent of the weight and half the cost of ½ inch plywood. With the attachment system, a custom-sized sheet of Bubble-X can be applied to a window in seconds without the need for nailing and disfiguring the window trim. Additionally, due to its durability and water proof characteristics, the Bubble-X sheet is reusable, while plywood gets wet and needs to be discarded after every use.
Shannon Stump – graduating Fall of 2017 in Engineering Technology. Shannon has designed a new lightweight and foldable pet carrier system. The carrier can be manufactured in virtually any size. The prototype carrier has been tested to 37 pounds. The carrier is durable, reusable, and easy to clean. Since the carrier is foldable, it takes up substantially less space on retail shelves than existing molded pet carriers.
Roger French – pursuing a degree in Engineering Technology. Roger has created an indoor/outdoor sign system. Bubble-X is durable and 100 percent recyclable and can be printed or laminated. Most outdoor signs are currently produced with corrugated plastic material which is not as durable and shows lines in its surface, presenting a less appealing appearance. Bubble-X’s surface is totally smooth. Roger’s sign system, which includes a tubular steel frame, is easy to change out and can be scaled to 4 X 8 foot panels. He is also designing a frame system that can be applied to long haul trucks without adding much weight.
At a luncheon on May 25 the students will present their projects to a panel that will include Primex Plastics President Mike Cramer, and a representative of Primex’s parent company, ICC Industries. After evaluation and testing, Primex Design & Fabrication will manufacture and market the selected products.
PRIMEX COLOR, COMPOUNDING & ADDITIVES ANNOUNCES NEW LINE OF THERMOPLASTIC ELASTOMERS
Primex Color, Compounding & Additives (PCC&A), formerly O’Neil Color & Compounding, a leading supplier of color and polymer solutions for plastics processors, has announced a new line of thermoplastic elastomers (TPEs) for general molding use.
The Faraprene H300 series of elastomers is intended for general use in a wide variety of injection molded products and adheres well to polyolefin (i.e. PE, PP) substrates. “Faraprene adds soft touch and grip to many household, industrial and OEM products,” says Technical Director Anthony Montalvo. “It’s a lightweight and durable product that can be custom-compounded to meet specific needs such as color and UV resistance and comes in a range of hardness from 25 to 95 Shore A.”
According to Product Manager Lee Pfaffle, PCC&A has produced TPEs for over 25 years. “This new line is formulated for general use while our other Faraprene lines have very specific characteristics such as high temperature resistance, high abrasion resistance and high strength for more demanding applications. We offer a wide range of TPE grades to meet critical performance requirements.”
- Faraprene H300 Features
- General purpose use
- Appropriate for injection molding applications
- UV resistant grades available
- Soft, flexible feel
- Excellent grip characteristics
- Adhesion to PP, PE substrates
- Drying not required
- Hardness 25-95 Shore A
- Easily colorable
O’NEIL TO DEMO THERMOPLASTIC ELASTOMERS AT PACK EXPO CHICAGO
O’Neil Color & Compounding, a leader in color masterbatches and custom specialty compounds for the plastics processing industry, will display its Faraprene C-Series thermoplastic elastomers (TPE) for injection and extrusion at Pack Expo 2016 booth E-6782, November 6-9 in Chicago. Faraprene C, available in various hardness levels from Shore A 30 through 85, is an ideal replacement for thermoplastic rubber and PVC-based elastomers in a wide variety of applications requiring highly elastic properties.
“In addition to outperforming other competitive thermoplastic elastomers in scratch and tear resistance along with elastic behavior, Faraprene C is also an ultra-low extractable material,” said Primex Color, Compounding & Additives’s Product Manager Lee Pfaffle, “making it ideal for many consumer and industrial applications.” Additionally, Faraprene C is 100 percent recyclable and contains no phthalates as found in PVC-based materials “It’s a superior choice for molders and manufacturers attempting to reduce their environmental impact,” said Pfaffle.
The Faraprene C-Series is available as high gloss, high clarity, and pre-colored or black and can be custom-formulated to meet specific manufacturing needs with additional performance enhancing additives. All Faraprene C-Series grades can be formulated to FDA compliance standards so they can be used in many consumer end-use applications.
For more information about the Faraprene line contact your O’Neil representative or Lee Pfaffle at (423) 327-2876. Primex Color, Compounding & Additives’s Faraprene data sheets can be downloaded at http://primexcolor.com/products/faraperene-tpetpo/
WOODRUFF/O’NEIL ANNOUNCE NAME CHANGE
Woodruff Corporation, the leading manufacturer of reusable, returnable and recyclable plastic shipping containers, point of purchase displays and retail packaging, and O’Neil Color & Compounding, a leading supplier of color and polymer solutions for plastics processors, have announced a change of their names to Primex Design & Fabrication and Primex Color, Compounding & Additives, respectively. Both companies are divisions of sheet extruder Primex Plastics Corporation, a subsidiary of ICC Industries.
“The new names are more indicative of who we are, what we do and our relationships with our parent company, our customers, employees and suppliers,” said Doug Borgsdorf, Primex’s Business Unit Director for Woodruff and O’Neil.
Though the new names don’t become official until January 1, 2017, both companies are using Pack Expo 2016 (Chicago, November 6-9) to launch what they call the “one company” concept. “We want to use this opportunity to introduce our various constituents to, not only the new names, but the important changes in the way we interface with the market,” said Borgsdorf.
“The new names reflect an emphasis on the synergies between Woodruff, O’Neil and Primex in delivering total solutions to our customers, from materials through recycling,” said Primex President Mike Cramer. But it’s more than one-stop shopping. It’s involvement at the project development stage, ensuring all of Primex’s assets are employed to solve customer challenges and offer the best solutions. According to Cramer, these resources include technical development at Primex’s John J. Farber Technology and Innovation Center, centralized quality control, faster delivery and a single point of contact for the entire process. “All of our Business Managers will be cross trained and well versed in the entire Primex family of services and expertise, allowing them to offer our customers a more comprehensive approach to their needs,” said Tim Schultz, Primex Vice President of Sales and Marketing.
An additional benefit to the changes include customer access to Primex’s vast inventory and local distribution network. These encompass five U.S. locations and one in Europe, providing just-in-time (JIT) materials for manufacturers along with 24/7 technical support.
“The name changes allow our companies to approach the market with one unified brand, one that has stood for high quality, innovative products since 1965,” said Schultz.